Wencon Fixation Tools
Wencon Fixation Tools is used for repair of cracks and corrosion in tanks, leaking pitting and welding seams. The Fixation Tools helps to support and secure Wencon products to the damaged part, and can be used in combination with most Wencon products.
The set contains:
- 2 x Fixation plates 250 mm, flat
- 2 x Fixation plates 250 mm, angled 4 x Anchor bolts
- 1 x Metal drill bit, 6,5 mm
- 4 x M6 Washers, big
- 4 x M6 Nuts
- 4 x M6 Wing Nuts
- 8 x M6 Washers
| Product number | Product name | IMPA no. | ISSA no. |
| No. 2808 | Wencon Fixation Tools | 812596 | N/A |
Wencon Fixation Tools
Wencon Fixation Tools is used for repair of cracks and corrosions in tanks, leaking pitting and welding seams. The Fixation Tools helps to support and secure Wencon products to the damaged part, and can be used in combination with most Wencon products.
The Fixation Tools contain:
2 x Fixation plates 250 mm, flat
2 x Fixation plates 250 mm, angled 4 x Anchor bolts
1 x Metal drill bit, 6,5 mm 4 x M6 Washers, big
4 x M6 Nuts
4 x M6 Wing Nuts 8 x M6 Washers
Drill the cracks in both ends with a 6,5mm drill bit, to prevent the crack from running. Make corresponding holes in the fixation plate and push the anchor bolts through the plate and the holes, making sure that the anchor hooks up on the backside of the wall.
Apply the Wencon product between the fixation plate and the wall and tighten it using the washers and the nuts.
The same procedure goes for the angled fixation plate, which is intended for support on leaking welding seams.
| Brand | WENCON |
|---|---|
| Product Name | Wencon Fixation Tools |
Lucas Marine OÜ, Estonia
Department of international supplies
Phone: (+372) 5688 0639
Email: lm@lucas-marine.com
Tell us what you need