Vapor Control Valves for Gauging and Sampling Petroleum and Chemicals
MMC B-type vapor-control valves
Positive shut-off units
Tri-mode tank gauging
Ullage, interface, temperature and oxygen sensing
B-type, Micro “B” and the MMC (Asia) F50 are 2-inch (50mm) full-bore valves
The Mini Micro “B” is 1 1/2-inch (38mm) – (OBSOLETE)
Flanged Valves for easy installation and accurate positioning
Constructed of grade 316 stainless steel with a stainless steel cap
Stainless steel ball valves with Teflon ball valve seals
Available in 1/2 or 1/3 liter sampling, size 2 inch with MMC sampling tapes
1 inch valves available for manual tank sounding
3 inch valves available for 1 liter sampling
MMC Type "B" Vapor Control Valve Dimensions
Model Numbers and Technical Specs
MMC Type “B” Vapor Control Valve Dimensions
Note: H1 dimension fixed by gauging tape construction.
Vapor Control Valves for Gauging and Sampling Petroleum and Chemicals
Viton ® used for all other seals. A stainless steel cap is standard and a selection of other seal materials are optional. (Viton ® is a registered trademark of DuPont Dow Elastomers.)
Mounting Flange Dimensions:
2″ “B” Valve B-2318-23-F316-SC50 – 6″ (152) O.D., BC 4 3/4″ (121) – Bolt Holes (4) 3/4″ (19).
2″ Micro B-2318-24-FMS-SC50 – Bolt Holes (4) 3/4″ (19).
1 1/2″ Mini Micro “B” (2318-2S-F316BC) – 5″ (127) O.D., BC 3 7/8″ (98) – Bolt Holes (4) 5/8 (16) – (OBSOLETE).
2″ F50 50mm MMC-A (JIS) – 155mm (6.1″) O.D., BC 120mm (4.72″) – Bolt Holes (4) 19 (0.75″).
Weights:
2″ “B” Valve – 14 lb. (6.35 kg).
2″ Micro “B” – 13 lb. (5.9 kg).
1 1/2″ Mini Micro “B” – 9 lb. (4.1 kg) – (OBSOLETE).
2″ F50 MMC-A (JIS) – 19.8 lbs. (9 kg).
Pressure Rating:
150 psi (10kg/cm sq), bubble tight at 2 psi (0.14kg).
Suitable for positive tank isolation, MMC B-type vapor-control valves are positive shut-off units that support Tri-mode tank gauging functions (ullage, interface & temperature) as well as oxygen sensing. They are available in three models. The original B-type, Micro “B” and the MMC (Asia) F50 are all 2-inch (50mm) full-bore valves. All valves are flanged for ease in installation and accurate positioning. Constructed of 316 stainless steel with a stainless steel cap, they have stainless steel ball valves with Teflon seals. In addition, 1/2 or 1/3 liter sampling is available in all 2 inch sizes with the use of MMC sampling tapes. All gauging tapes fit directly into any type of MMC vapor-control valve.
| Brand | MMC |
|---|---|
| Product Name | Vapor Control Valves for Gauging and Sampling Petroleum and Chemicals |
Lucas Marine OÜ, Estonia
Department of international supplies
Phone: (+372) 5688 0639
Email: lm@lucas-marine.com