Slewing Bearing for Pendulum

The happiest part of childhood was going to the amusement park. Every amusement park has big rides, and I think the most exciting one is the pendulum.The working principle of the big pendulum is: the main part is driven by a motor to push the slewing bearing, so that the motor can flexibly track the swing of the pendulum, to achieve non-uniform rotation.There are many sources of power for the big pendulum, including electrical trends, wind-up gears, and the gravity of the hammer moving back and forth between points. Super big pendulum, also known as big pendulum, meteor hammer, is becoming the international popular new amusement equipment, is also one of the most popular amusement park projects.As a large entertainment facilities of stimulation type, the safety needs Pay more attention:1. The amusement equipment business units or their authorized maintenance unit must meet the characteristic of each amusement equipment by making monthly inspection, daily inspection table,monthly inspection shall inspect all kinds of important parts, weld and safety protection device, daily inspection should be key point to make sure whether the equipment operation is normal, seat belts, safety pressure bar, locking device, reliable, such as hanging device,insurance device or the electrical control is normal and reliable. Inspection records must be recorded for future check.2. Amusement equipment operators must carry out trial operation and routine safety inspection before daily operation, check and confirm safety devices, and make corresponding records. If any abnormality is found after inspection, it must be handled in time. It is forbidden to run the equipment with faults.

Lucas Marine OÜ, Estonia
Department of international supplies
Phone: (+372) 5688 0639
Email: lm@lucas-marine.com

Tell us what you need